BE35 500.4 BRUTUS ELITE 4 CHANNEL AMPLIFIER

Hifonics

  • £299.00
  • Save £100
Tax included. Shipping calculated at checkout.


Hifonics 35th Anniversary 4 x 125 Super A/B Class™ Brutus Elite four channel car audio amplifier with electronic crossovers. 

Specification
  • CLASS

    Super A/B Class™

  • VARIABLE VOLTAGE

    0.2V - 6V

  • SIGNAL TO NOISE

    >85dB

  • FREQUENCY RESPONSE

    20-35kHz

  • CROSSOVER TYPE

    Electronic

  • HIGH PASS CROSSOVER: 12DB PER OCTAVE

    10Hz - 1.5KHz

  • LOW PASS CROSSOVER: 12DB PER OCTAVE

    30Hz -500Hz

  • CROSSOVER FREQUENCY RANGE: CH1 & CH2

    N/A

  • CROSSOVER FREQUENCY RANGE: CH3 & CH4

    N/A

  • CROSSOVER FREQUENCY RANGE: CH 5

    N/A

  • TONE CONTROL

    Bass EQ

  • BASS BOOST

    0~9dB@45Hz

  • SUBSONIC FILTER

    N/A

  • PHASE SHIFT

    N/A

  • POWER @ 1-OHM

    N/A

  • POWER @ 2-OHMS

    4 x 125

  • POWER @ 4-OHMS

    4 x 65

  • MONO BRIDGED @ 2-OHMS

    N/A

  • MONO BRIDGED @ 4-OHMS

    2 x 250

  • TOTAL CHANNELS

    4

  • AUDIO INPUTS

    Yes

  • AUDIO OUTPUTS

    No

  • POWER TERMINAL: 12V/GND

    4ga

  • SPEAKER TERMINAL WIRE GAUGE

    12g

Features 
  • PRE-AMP CIRCUITRY: Low Noise PreAmplifier

    Low voltage signal from the source unit comes into the amplifier pre-amplifier circuit with minimal distortion

  • INPUTS: Tiffany Style RCA Connectors

    Audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection

  • HI LEVEL INPUTS: 

    N/A

  • OPERATION MODE: Four Channel, Full Range, Bridgeable

    Flexible installation allows this amplifier to run in four channel or bridged mono mode

  • CROSSOVER / SIGNAL SHAPING: Accu-Cross

    Accu-Cross crossovers allow for complete control of the signal directing to all speakers. See specifications section for specific frequencies

  • EQUALIZER: Electronic

    Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier

  • CLASS / TOPOLOGY: Super A/B Class™

    Developed over three decades of engineering to deliver the highest level of sound quality and power efficiency. At very high listening levels. Hifonics Super A/B Class results in lower distortion, higher current efficiencies and less heat than conventional amplifier designs.

  • OUTPUT DEVICES TECHNOLOGY: Ultra-Fi™ MOSFET

    The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion

  • HEAT SINK: Aluminum

    Heavy duty aluminum alloy heat-sink efficiently moves heat from the MOSFET where it can be cooled

  • POWER SUPPLY: Twin turbo

    The Twin Turbo Coil PS is a Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices

  • STRAPPING: 

    N/A

  • BASS REMOTE: 

    N/A

  • OUTPUT CONNECTIONS: Nickel-Plated

    High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant

  • CONNECTIONS TYPE: Illuminated, Molded and Angled

    Secure connection for all Power, Ground and Speaker connections. Angled for ease of access during installation.

  • SIGNAL PASS THROUGH: Yes

    One pair of Tiffany style connectors for a full range, L & R output allow distortion free signal to be passed through this amplifier to feed that signal to other components without the need for noise generating Y cables

  • DIAGNOSTICS: 4-Way System Protection Circuitry

    Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel

  • MARINIZED / WATERPROOF: 

    N/A

  • ILLUMINATION: Yes

    Hifonics logo the molded and angled output connectors

Manual

BE35 500.4 BRUTUS ELITE MANUAL

 



    We Also Recommend